Quote:
Originally Posted by slider2828
S14 rear pickup points for suspension is different for suspension, so the rear sway bar is not interchangeable. The front track width are also different and also S14 utilize straight bolt through sway bar where as s13 is blade type.
Don't bother with S14 sway bars on s13, you will get suspension bind....
|
Yeah figured. I had read about them not fitting a long time ago but yeah.
Quote:
Originally Posted by slider2828
8/6 is sufficient for road going s13's with some stick rubbers. 10/8 if you running the track with wide tires like 265 or 275s with all suspension mods.
|
Also figured. And yeah I don't even plan on running THAT wide lol.
Quote:
Originally Posted by slider2828
Don't bother much with knuckles and junk until you swap your s13 subframe for a s14 or s15 subframe. That will give you better traction than spending all the monies on knuckles.
|
I already have a rear S14 subframe. I was mainly talking about front knuckles since the rear roll center isn't nearly as bad.