well day 2 on the drag s13 ka-t buildup today.
installed the shift light, took off the aluminum bezel, put carbon fibre block offs where the drivers vents normally are, one side will be housing some switches, I got 2 of the 3 installed today including the indicator, need to get a on-off-on momentary switch tomorrow. MSD RPM SWITCH for the shift light is mounted on the pass side of the center console. also did something kinda cool in my book, I'll have a pic of that too.
shift light just after mounting it up
what the shift light looks like from the outside
MSD RPM Activated Switch, it controls the shift light
thats got the new carbon fibre block off plates, switches, shift light is actually lit up by itself, there was no flash for this shot, I just had a 9-volt hooked up to it
that's with the wheel up, and flash on
that was my little cool thing I did, I custom did that myself, not sure if I'll use that or get the b+m one.
and no people I'm not posting day by day shots, just when I do something kinda modded like this stuff. next day I work on it I'm finishing wiring up the nitrous stuff, and then re-doing the center vent block off plate, and then de-spoilering the trunk
KEvin