Quote:
Originally Posted by S13project
Get ready for instant spool with the 6258. So quick!
|
I'm pumped for it!
Doing a little mock assembly I've figured out a few things. One is that the rear inner stud on the T25 is going to need to be shorted a little bit. I bought flying miata inconel studs, so that should be interesting.
Secondly is that the water fittings need to be re-arranged so that the in is on bottom and the out is on top. This helps with cooling.
Here's a little mockup.
One of the last few pieces, a Taarks oil filter relocation block.
And I bought S14 lower control arms, which are a tad bit longer in the tension rod section, so I think I'm just going to redrill my tension rod brackets and run them.