Quote:
Originally Posted by mr.nismo.
If you read a couple posts down after my initial one, the longer pivot ball fixed my issue. I was worried about over pressing the pp fingers since now the slave is in the fully retracted position, and the tob had a 1/8" gap to the PP. That's when I was spoon fed that adjustable rod (currently on the way). The other thing too is that z33 slaves have a spring that always wants to push the rod out. That means no matter what the tob will always ride the pp.
Sent from my SM-N986U using Tapatalk
|
Im running a exedy hyper single(removed an act clutch no issue)
I had no clutch pedal till the last inch. No dampner, bleed perfect. Eneder up making a new slave master rod about 1/2inch longer..and perfect pedal..im using oem tb. What ive seen i think the exedy tb is thicker and that could be my problem..idk im good with my solution