Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

jr_ss · 11-19-2020, 07:47 AM

Machine 3mm off either mount, problem solved! It should be pretty easy to take a grinder and use the blade as a guide for the amount needed to remove.

In all honesty, it is less than an 1/8th of an inch and quite a distance from the crank. If it was in close proximity to the crank, it probably would cause more of an issue.

11-19-2020, 07:47 AM	#6
jr_ss Post Whore! Join Date: Dec 2005 Location: Pa Posts: 6,415 Trader Rating: (35)	Machine 3mm off either mount, problem solved! It should be pretty easy to take a grinder and use the blade as a guide for the amount needed to remove. In all honesty, it is less than an 1/8th of an inch and quite a distance from the crank. If it was in close proximity to the crank, it probably would cause more of an issue. __________________ My SR20VET Does your VTC gear rattle in your S14/15 SR? PM me.