Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - This is the roll center, suspension pickup, and steering angle modification thread.

Marphie21 · 07-21-2021, 01:32 PM

Since this was the baseline test, i had the rear at 0 camber and 0 toe.

Unfortunately i think the next time ill be able to drive the car will be next year, as Ill send out the chassis to be fully restored.

I didnt plan on going straight to this stage of the build this early, but since the SR that came with the car is now spitting oil everywhere, i might as well finish the chassis work and put in my built SR20. From there I can do more tests.

It was also obvious that the chassis flex wasn't letting me feel all of the performance from the suspension, so further testing after restoration might lead to more accurate results/feedback.

07-21-2021, 01:32 PM	#7869
Marphie21 Join Date: May 2012 Location: Philippines Posts: 45 Trader Rating: (0)	Since this was the baseline test, i had the rear at 0 camber and 0 toe. Unfortunately i think the next time ill be able to drive the car will be next year, as Ill send out the chassis to be fully restored. I didnt plan on going straight to this stage of the build this early, but since the SR that came with the car is now spitting oil everywhere, i might as well finish the chassis work and put in my built SR20. From there I can do more tests. It was also obvious that the chassis flex wasn't letting me feel all of the performance from the suspension, so further testing after restoration might lead to more accurate results/feedback.