Quote:
Originally Posted by slider2828
I think Dakota Digital Released a one box easy wire for CD009 GPS Speed.
https://www.dakotadigital.com/index....rod/prd837.htm
SPEED 2 is a sine wave signal for most older speedometers.
Dakota Digital speedometers, and dash systems, can use either output.
Based on the manual, I can set it to a 16K PPM signal.....
https://www.dakotadigital.com/pdf/GPS-50-2.pdf
Then I wire it to the cluster. Once I have the signal wire from the Dakota, do I just wire back into the speed sensor harness?
I guess to where the sensor use to be which is on my KA24E harness, tranny harness Y/G wire?
|
This is such a great thread, wanted to bump it. Drove the car around 1-3 gear no problem. Still in tuning phase so hopefully get more gears soon. Reverse is also fine.... I am running on a 4.3 final, I think its too much gear.... so will need to go back to the original 4.1..... at least I kept it.
also just purchase the dakota digital speed..... will report back if it all worked out to get speed on the speedometer.