Quote:
|
Originally Posted by CHARLIE2020
So a 96 J30 VLSD w/ABS will swap right into a S13 coupe w/o ABS..........I can still use the S13 non-ABS driveshaft?.................or should I get the J30 VLSD w/ABS driveshaft?
|
Just use your S13 driveshaft, ABS or not...both work. You WILL need the longer carrier bolts from infiniti and the insulating washers that fit between the head of the carrier bolt and the diff. and the rubber spacer/washers that fit between the top of the diff and the car. If you want to do it right....hit up the infiniti parts department. Make sure they DONT order you the late 96-97 upper washer/spacer, it has the bushing and washer/spacer as one peice and is very expensive, so get the 95 peice. The carrier bolts have the same part numbers but the washers have a different thickness "crown" of rubber around them, so they are 2 different part numbers and you need one of each (the diff torques a certain direction so one of the "crowns" is thicker than the other one).
Hope that helps.
-M