Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

**Phlip** · 02-16-2005, 11:28 PM

I took a piece of 1/4" thick plexiglass, cut the holes in it for the 6 x 9 speakers, covered it in fabric, then fiberglass resin, sanded, primed, primed, primed, primed, primed (see a pattern?) painted (x4 coats) and used a satin enamel clearcoat... Backseat goes bye-bye, so the regular oldschool 6 x 9 boxes will sit in that pass through, while the board I have them mounted to will be mounted to the former location of the back seat...

02-16-2005, 11:28 PM	#3
Phlip Yes, I look like that Join Date: Mar 2002 Location: In my supervillain's lair Posts: 27,980 Trader Rating: (19)	I took a piece of 1/4" thick plexiglass, cut the holes in it for the 6 x 9 speakers, covered it in fabric, then fiberglass resin, sanded, primed, primed, primed, primed, primed (see a pattern?) painted (x4 coats) and used a satin enamel clearcoat... Backseat goes bye-bye, so the regular oldschool 6 x 9 boxes will sit in that pass through, while the board I have them mounted to will be mounted to the former location of the back seat... __________________ Weirdo And I write too!