Quote:
|
Originally Posted by l33tmonkeyman
I am in the midst of putting SPL solid aluminum subframe bushings in my car. i got the old bushings out but there is still a metal sleeve in the subframe that has to be taken out. it is really siezed in there with rust. Any ideas with how to get them out?
|
The usual way is to make a cut through the sleeve (be careful not to cut the subframe), then use a chisel to bend/peel back the sleeve... you can use a hand saw (slow but safe) or a die grinder (fast but must be very careful, best not to fully cut through the sleeve, do the last bit by hand)...