|
AFAIK the SSA bottom mount does not allow the use of an external wastegate. That leaves you with the 95% of t25/28 that are internally actuated that came off another car. Therein lies my statement. If you go with a t25/28, get it off a sr20det or something close. Those run 7psi actuator pressure. They can be adjusted/rigged to go higher without a boost controller, but cannot go lower. And at 7psi.. you'll be pushing the limit of 370cc injectors with a t28. ~9-10psi on a t25. So, my reasoning on not needing a boost controller during the ordering parts process. Later, have a blast with it once you have the setup/fuel to support more pressure.
-Jeff
__________________
Whatup?
|