Quote:
|
Originally Posted by mjjstang
hey I had a chance to take the manifold and turbo off today and would like to know a few things, 2 questions,
2. I think the lines are pretty straight forward with the exception of the coolant that goes to the back of the engine, the line that instead of having an AN fitting, is just a rubber hose, this is supposed to go to what? I know that the stock line is just that, a rubber hose that then connects to the hard line, so I understand that, but if I remove the stock line and then put this on, I am left with 2 female end rubber hoses, so I assume I would need a short piece of metal tube to connect the taka line to the coolant line on the back of the engine. do you guys know where I coudl find a line about three inches with barbs on each end. or am I going about this all wrong.
thanks for any info
|
yes the hose is supposed to be like that, would u give more detail first:
1) what kind of turbo, or then which engine it came off if its a used stocker.
2) what engine u putting it on. ka, sr, rb??
maybe then i could actually give u input.
good day,