Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - how do u know when clutch master cylinder is going

camppain · 03-21-2002, 10:15 PM

in addition to the master cyl. make sure when you replace it the pedal has a bushing make sure its in there or else you will think you have air in your system. the pedal will feel like its depressed corectly but will not push the pushrod in the m/c completly due to the slack of it moving left and right. something to keep a heads up on.

you'll be amazed how many techs at nissan miss this

03-21-2002, 10:15 PM	#4
camppain Will never get banned... Join Date: Sep 2001 Location: San Diego CA Age: 45 Posts: 1,510 Trader Rating: (0)	in addition to the master cyl. make sure when you replace it the pedal has a bushing make sure its in there or else you will think you have air in your system. the pedal will feel like its depressed corectly but will not push the pushrod in the m/c completly due to the slack of it moving left and right. something to keep a heads up on. you'll be amazed how many techs at nissan miss this __________________ -=-99 Sentra SE 5 speed-=- -=-95 240 SE 5 speed-=-