Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

BlackFox · 03-21-2002, 01:06 AM

I'll be boosting a KA to around 20psi so I want to get a Tial 40mm wastegate because the springs on the 35mm only go to 16psi. Anyone know the bolt pattern on the RevHard manifold? Is it 2 or 4 bolts, so i know if the 40mm will fit or not.

Thanks

03-21-2002, 01:06 AM	#1
BlackFox Zilvia Junkie Join Date: Feb 2002 Location: San Jose, CA Posts: 534 Trader Rating: (0)	I'll be boosting a KA to around 20psi so I want to get a Tial 40mm wastegate because the springs on the 35mm only go to 16psi. Anyone know the bolt pattern on the RevHard manifold? Is it 2 or 4 bolts, so i know if the 40mm will fit or not. Thanks __________________ Current Cars: 1976 Mercedes Benz 300D 1995 240sx SE aka Kate (winner: Best Stock S14 @ 2002 National Convention) http://community.webshots.com/user/jeff976cal If you're interested in parts email me [email protected]