Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

pablo180 · 06-13-2005, 10:16 PM

I've just put in a S13 DOHC into my 89 coupe chassis. I'm trying to hook up the A/C and i've got everything from the 91+ chassis (compressor, condenser, hardlines, etc) the wiring is where I ran into the problem.

The plug that hooks up to the compressor is different between the SOHC/DOHC chassis.

Here's the question...will the A/C setup function properly if I cut the plug off of a 91+ chassis and solder it onto the 89 A/C wiring?

Thanks in advance,

Pablo

06-13-2005, 10:16 PM	#1
pablo180 Zilvia Member Join Date: Dec 2004 Location: Oxford, UK Age: 42 Posts: 206 Trader Rating: (0)	SOHC to DOHC A/C question I've just put in a S13 DOHC into my 89 coupe chassis. I'm trying to hook up the A/C and i've got everything from the 91+ chassis (compressor, condenser, hardlines, etc) the wiring is where I ran into the problem. The plug that hooks up to the compressor is different between the SOHC/DOHC chassis. Here's the question...will the A/C setup function properly if I cut the plug off of a 91+ chassis and solder it onto the 89 A/C wiring? Thanks in advance, Pablo