Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

koz · 06-18-2005, 03:27 PM

I'm wondering if anyone has ever removed/replaced the hexagon shaped weight/spacer from the tranny end of the driveshaft? Don't ask me why, but i removed (and lost) it when i did my SR swap and now my car has some serious driveshaft vibrations at certain rpm's.

I guess what i want to know is can i just take the hex thingy from my parts car and use it with my existing driveshaft (even though the FSM says "do not remove") or am i better off to not mess with it and use the entire driveshaft from the parts car?

06-18-2005, 03:27 PM	#1
koz Join Date: Oct 2002 Location: Toronto <--> Barrie Posts: 16 Trader Rating: (0)	driveshaft vibration I'm wondering if anyone has ever removed/replaced the hexagon shaped weight/spacer from the tranny end of the driveshaft? Don't ask me why, but i removed (and lost) it when i did my SR swap and now my car has some serious driveshaft vibrations at certain rpm's. I guess what i want to know is can i just take the hex thingy from my parts car and use it with my existing driveshaft (even though the FSM says "do not remove") or am i better off to not mess with it and use the entire driveshaft from the parts car? __________________ '92 240SX LE Coupe (Redtop SR20DET) '89 240SX Fastback (Blacktop SR20DET) '91 Hardbody King Cab '95 Pathfinder XE-V6 Special Edition #196 '98 Prelude (F20B powered)