|
Int. Wastegate actuator size
Installed new t3/t4 but due to manifold design i had not way to mount the interall wastegate onto the turbo. so i had to make a halfass mount. but does the size of the actuator matter for holding the wastegate, mine came with a huge actuator bell, while ill prob buy one, size of a t25, and wondering if that will hold just fine. today i cut the rod. so my actuator rod is about 1.5 in long now, as i rethreaded it, and mounted to the compressor size, i had to somehow fit the bell in between the 2 exhaust runners. anyway, does it matter the size of the bell housing for a t3/t4 swingvalve wastegate
__________________
93 h/b. ka24de-t3(14), enthapy controlled .20bore, weistco 8.5.1cr, gReddy FMIC, E/L mani,t3 turbo to a 3in D/P to a HKS(88mm)HiPower and for cool sound effects the oldskool HKS Superblow, and you ask what about fuel? let me tell you 580cc, yes i said 580cc's, act clutch/flywheel. Buy my Coolio trading cardz!
|