Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

camppain · 03-28-2002, 10:23 AM

welcome to the wonderful world of trying to bleed a 240 clutch. every nissan tech will tell you they are annoying and hate them.

and they are. first start with bleeding the dampner. have someone pump your clutch pedal several times then hold it while you loosen the bleeder screw. redo that a few times then move to the slave cylinder and repeat the process for the slave a few times. and then see how it is.

also check for the bushing that goes on your clutch pedal if its not in there it will cause gear grind and not let you disengage the clutch correctly. that is very overlooked and can be a problem that wontt even be thought of

03-28-2002, 10:23 AM	#4
camppain Will never get banned... Join Date: Sep 2001 Location: San Diego CA Age: 45 Posts: 1,510 Trader Rating: (0)	welcome to the wonderful world of trying to bleed a 240 clutch. every nissan tech will tell you they are annoying and hate them. and they are. first start with bleeding the dampner. have someone pump your clutch pedal several times then hold it while you loosen the bleeder screw. redo that a few times then move to the slave cylinder and repeat the process for the slave a few times. and then see how it is. also check for the bushing that goes on your clutch pedal if its not in there it will cause gear grind and not let you disengage the clutch correctly. that is very overlooked and can be a problem that wontt even be thought of __________________ -=-99 Sentra SE 5 speed-=- -=-95 240 SE 5 speed-=-