Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

Rittmeister · 08-02-2005, 08:51 AM

OK.

1. I searched. Didn't find my answer. I've seen all of those writeups and they don't help me a bit. For the record, I've been running the 10" fan setup with relays and Pivot controller for months now with no trouble. I wasn't asking how to wire fans up.

2. You didn't read my question carefully, and I admit on re-reading it that I worded it poorly.

So, I'll re-ask it:

Which wires ON THE ALTIMA FANS are power and ground for the high speed fan setting? There are four wires sticking out of each motor, black/blue/green/yellow, and I simply need to know which are which.

Thanks again.

08-02-2005, 08:51 AM	#3
Rittmeister Zilvia FREAK! Join Date: Jan 2003 Location: Cincinnati OH Age: 48 Posts: 1,033 Trader Rating: (9)	OK. 1. I searched. Didn't find my answer. I've seen all of those writeups and they don't help me a bit. For the record, I've been running the 10" fan setup with relays and Pivot controller for months now with no trouble. I wasn't asking how to wire fans up. 2. You didn't read my question carefully, and I admit on re-reading it that I worded it poorly. So, I'll re-ask it: Which wires ON THE ALTIMA FANS are power and ground for the high speed fan setting? There are four wires sticking out of each motor, black/blue/green/yellow, and I simply need to know which are which. Thanks again.