Quote:
|
Originally Posted by h22lude
Don't do everything at once. Install the stock motor and see how it runs then slowly added the upgrades and mods. If you put everything in at once and it doesn't run right, you now have a ton of things to check isn't of just checking the motor.
Back on topic, I would replace the gaskets and belts. You will want a Z32 MAFS. I don't know if you forgot to say it or you already ahve it but a 3" exhaust will be needed. You might want to replace the clutch/flywheel as well.
|
cool, gaskets and belts, a manual driveshaft. I will probably do the lsd before the swap though. also have the 3 inch exaughst already. thanks