Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

veilside180sx · 10-07-2005, 01:07 AM

Or you can get real poly ones from JGS. I have Nismo ones and next time I'm going with a set of these. They don't raise the motor at all.

The mount is made by Energy Suspension and the billet adapter made by JGS

The motor is located just like stock (not higher like the Nismo MMs).
Price will be 119.99 a set (a little cheap than Ni$mo MM from most sources). Your choice of red or black. The only mod would be enlarging the MM engine bracket hole to 7/16", if anybody doesn't have a drill I can do a core exchange on pre-drilled engine brackets... but it is really easy to do since you will need to either pull the brackets or the cross member to get the engine mounts in anyhow

10-07-2005, 01:07 AM	#3
veilside180sx Zilvia Junkie Join Date: Apr 2004 Location: Portland, OR Posts: 303 Trader Rating: (0)	Or you can get real poly ones from JGS. I have Nismo ones and next time I'm going with a set of these. They don't raise the motor at all. The mount is made by Energy Suspension and the billet adapter made by JGS The motor is located just like stock (not higher like the Nismo MMs). Price will be 119.99 a set (a little cheap than Ni$mo MM from most sources). Your choice of red or black. The only mod would be enlarging the MM engine bracket hole to 7/16", if anybody doesn't have a drill I can do a core exchange on pre-drilled engine brackets... but it is really easy to do since you will need to either pull the brackets or the cross member to get the engine mounts in anyhow Last edited by veilside180sx; 10-10-2005 at 10:10 PM..