Quote:
|
10. Guide Coating Guide coating is done to help highlight areas that require additional sanding during step #11 . Apply a thin dusting of guide coat over the entire primed area. Allow to dry for a minimum of 10 minutes.
|
http://www.sherwin-automotive.com/diy/repairsteps/
Ok. "thin dusting".
Guide coat is used to find the LOW spots, so there is no need to use heavy amounts of it.
When you buy a can of guide coat, it doesn't spray like a spray can, it just lightly mists. When you apply it in a gun, you do very light passes, across the area which work is needed, and so on. You can use a lot of it, but it is NOT NECESSARY.