Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - Check out my new BIG BRAKES!! anyone else do this yet???

Krinkov · 11-01-2005, 05:25 PM

stock rear.

Sti rear Brembo with EVO rear rotor

and it BOLTS RIGHT UP!!

it needs a 3mm spacer here for the correct offset, you need to trim/remove the dust cover thats all, the brembo brake line even screws right in!

For comparison.

I have the fronts going on too, but I need to machine a couple brackets, I had an extra set of the gold STI brembos, but Im close to certain the red EVO brembo calipers use the same bolt spacing. EVO take-off Brembos are pretty cheap, either from wreck part-outs or people upgrading, theres not a big market to sell them since all other EVO guys already have brembos so Ive seen whole sets front and rear sell for around $600! Im making a few sets of front brackets, let me know if anyone wants any

11-01-2005, 05:25 PM	#1
Krinkov Leaky Injector Join Date: Sep 2005 Location: SF Bay Area Age: 51 Posts: 89 Trader Rating: (0)	Check out my new BIG BRAKES!! anyone else do this yet??? stock rear. Sti rear Brembo with EVO rear rotor and it BOLTS RIGHT UP!! it needs a 3mm spacer here for the correct offset, you need to trim/remove the dust cover thats all, the brembo brake line even screws right in! For comparison. I have the fronts going on too, but I need to machine a couple brackets, I had an extra set of the gold STI brembos, but Im close to certain the red EVO brembo calipers use the same bolt spacing. EVO take-off Brembos are pretty cheap, either from wreck part-outs or people upgrading, theres not a big market to sell them since all other EVO guys already have brembos so Ive seen whole sets front and rear sell for around $600! Im making a few sets of front brackets, let me know if anyone wants any