Thread: 180sx brake question
View Single Post
Old 01-01-2006, 10:31 PM   #3
wootwoot
Post Whore!
 
Join Date: Jan 2004
Location: sarasota florida biatch
Age: 39
Posts: 3,850
Trader Rating: (0)
wootwoot is a name known to allwootwoot is a name known to allwootwoot is a name known to allwootwoot is a name known to allwootwoot is a name known to allwootwoot is a name known to allwootwoot is a name known to allwootwoot is a name known to allwootwoot is a name known to allwootwoot is a name known to allwootwoot is a name known to all
Send a message via AIM to wootwoot
Quote:
Originally Posted by CHARLIE2020
I can explain this:

First some facts:

1) 180SX uses a 280mm x 26mm diameter rotor, the Altima/Maxima/P11 G20 use a 280mm x 22mm diameter rotor

2) 180SX does not share the same caliper with the Maxima/Altima/P11 G20.......the 2 bolts that attach to the knuckle are of equal distance and will bolt up but the distance of the ears (mounting tabs) from the centerline of the axle are different specs between teh 180SX and Maxima/Altima/P11 G20 or basically differnt between FWD and RWD.

3) The proper rotor to use beside the JDM 180SX 4 lug rotor will be to use a 90 Z32 NA 280mm x 26mm diameter rotor and redrill to 4 lug or if your not 5 lug.


I dont know how I missed this before but I'm irritated I did. Have you personally tried the 1990 z32 n/a rotor or this is just speculation?
__________________
I'm from Florida so I'm probably a bit more strange than you
wootwoot is offline   Reply With Quote