Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

allmotorKA · 01-10-2006, 04:20 PM

Here is a link to a thread in freshalloy:

http://forums.freshalloy.com/ubbthre...=&fpart=1&vc=1

If you read from the 14th post down, you will see another person claim 244+ flywheel HP at 6600RPM and 217 ft-lb at 4700RPM on his NA KA. He also states later in the thread that CR was 9.5:1, Redline was 7200 RPM, and ran on pump gas. Sounds streetable to me. You will also see the pissing match that insued later...sort of like this thread did earlier.

01-10-2006, 04:20 PM	#2
allmotorKA Zilvia Member Join Date: Nov 2001 Location: SoCal Posts: 204 Trader Rating: (1)	Here is a link to a thread in freshalloy: http://forums.freshalloy.com/ubbthre...=&fpart=1&vc=1 If you read from the 14th post down, you will see another person claim 244+ flywheel HP at 6600RPM and 217 ft-lb at 4700RPM on his NA KA. He also states later in the thread that CR was 9.5:1, Redline was 7200 RPM, and ran on pump gas. Sounds streetable to me. You will also see the pissing match that insued later...sort of like this thread did earlier.