[sideview_180sx]

Originally Posted by allmotorKA

Here is a link to a thread in freshalloy:

http://forums.freshalloy.com/ubbthre...=&fpart=1&vc=1

If you read from the 14th post down, you will see another person claim 244+ flywheel HP at 6600RPM and 217 ft-lb at 4700RPM on his NA KA. He also states later in the thread that CR was 9.5:1, Redline was 7200 RPM, and ran on pump gas. Sounds streetable to me. You will also see the pissing match that insued later...sort of like this thread did earlier.

I also noticed he outright said it was a robello engine. obviously it has had some work done. pissing contest must end, just buy a robello engine and be done with it.