Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - want my s14 turn signal to act like s13 turn signal

g6civcx · 01-13-2006, 12:56 PM

If you want the bulb to light up for parking, and then light up even more for turning, you'll need the dual filament bulb found on the S13 turn signal. The S13 uses 1156/1157. One filament lights up for parking, and the other one only lights with the turn signal.

Get the turn signal harness from the junkyard, or you can get it new. It's only $9 apiece from the dealer. Then you need to splice in the appropriate parking and signal wires. You can use a FSM for the S13 to figure out which wire is which, or use a test light to measure which wire is hot when the parking light is on and when the signal is on.

If I understand correctly, your JDM corner lamp has 2 bulbs. One lights up with parking, and the other is for signaling. You wire these wires up to the S13 harness as described above.

01-13-2006, 12:56 PM	#5
g6civcx Post Whore! Join Date: Apr 2004 Location: Virginia, USA Posts: 5,764 Trader Rating: (5)	If you want the bulb to light up for parking, and then light up even more for turning, you'll need the dual filament bulb found on the S13 turn signal. The S13 uses 1156/1157. One filament lights up for parking, and the other one only lights with the turn signal. Get the turn signal harness from the junkyard, or you can get it new. It's only $9 apiece from the dealer. Then you need to splice in the appropriate parking and signal wires. You can use a FSM for the S13 to figure out which wire is which, or use a test light to measure which wire is hot when the parking light is on and when the signal is on. If I understand correctly, your JDM corner lamp has 2 bulbs. One lights up with parking, and the other is for signaling. You wire these wires up to the S13 harness as described above.