For those S13 owners who like me, either hate the electric seat belts or just want to swap the S14 manual belts for the heck of it. I myself got annoyed by the S13 electric belts choking my passengers and me at times.
SO I took action.
First, remove all the electric b/s. (lots of b/s)
So by now you're thinking, I don't want to be missing some interior panels because of the Manual belts or ... you're thinking I should buy Canadian interior pieces so it can be a clean install even though I'll spend a lot of $ get the Canadian parts and its a lot of trouble ... but not me.
(You’ll need a dremel)
First I cut the B Pillar panel (if that's what it's called) you'll have to cut enough to give the seat belt enough room to retract and move from side to side, I may have cut a tad too much, not bad for being the first panel I cut.
http://kidzelda.freewebspace.com/ima...sbpanelcut.jpg
Next cut a circle hole the size of the bolt into the B Pillar panel. Also, the S14 seatbelt blot will not reach the hole in the body of the car to bolt the seatbelts secure, so take a trip to the hardware store and get a longer bolt.
http://kidzelda.freewebspace.com/ima...bpanelcut2.jpg
This was the end result, I might get an extra panel and try and make it look more Sotck-ish .... But I'm ok with how it came out.
http://kidzelda.freewebspace.com/ima...sbpanelfin.jpg
It's ready to hold me in ! !
http://kidzelda.freewebspace.com/ima...sblockload.jpg
<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/sly.gif" border="0" valign="absmiddle" alt=':sly:'>