[caall99]

So a couple days ago i thought it would be a good idea to wash my car and clean my motor. i did all of this in a heated autoshop. i even left the car sitting in there to dry for at least 2 hours. I then drove the car back home and let it sit in my driveway which is <32 deg. f. The next day the car started right up and i drove it all day. later that day all of a sudden the car would not react to throttle input anymore, and bog down to the point of stalling. i cleaned all the plugs and connections and it seemed to run fine again, until i floored it again and the car stalled again. everytime this would happen, i would try to start the car, but the idle would become soo low and lumpy that it would imediately die. i noticed quickly and lightly tapping the throttle kept the revs up, but then letting go of the throttle would result in a stall. my consult port checker tells my the CAS is bad, i forgot if it was code 11 or 21. i took off the cas cover and it looks clean in there. could it be water in my wiring? whats going on here? i need this thing done so i can make it to my gf's debate tournament tomorrow. thanks guys and gals