Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - CAS wire questions S13 no spark, no inj pulse

driftstyre · 03-09-2006, 11:57 AM

Hi guys, I'm having a no-spark issue on an S13 motor. I searched this morning on quite a few forums. What I'm looking to know is:

Is there a powered input wire to the CAS from anywhere? last year I remember checking for power at the CAS and getting it. There's no power to the CAS now.

I ran a pinout on pins 40 30 22 31 back to the ECU and there's continuity.

I'm at a loss. I have no injector pulse and no spark. I posted on AEM forums this morning as I'm using AEM.

I also tested for power at the ignitor and coils, which were fine. Coils are grounded. All ECU pins which require gnd are grounded. All pins that are powered to the ecu are getting power.

I'm just stuck on thinking that the CAS had power last year and not now. I haven't run the car in a while.

Thanks,

Alex (posting under Bill's account so don't blame him for my stupidity)

03-09-2006, 11:57 AM	#1
driftstyre Zilvia.net Advertiser Join Date: Jul 2003 Location: Boston Age: 46 Posts: 748 Trader Rating: (4)	CAS wire questions S13 no spark, no inj pulse Hi guys, I'm having a no-spark issue on an S13 motor. I searched this morning on quite a few forums. What I'm looking to know is: Is there a powered input wire to the CAS from anywhere? last year I remember checking for power at the CAS and getting it. There's no power to the CAS now. I ran a pinout on pins 40 30 22 31 back to the ECU and there's continuity. I'm at a loss. I have no injector pulse and no spark. I posted on AEM forums this morning as I'm using AEM. I also tested for power at the ignitor and coils, which were fine. Coils are grounded. All ECU pins which require gnd are grounded. All pins that are powered to the ecu are getting power. I'm just stuck on thinking that the CAS had power last year and not now. I haven't run the car in a while. Thanks, Alex (posting under Bill's account so don't blame him for my stupidity)