Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

importnut · 04-03-2006, 01:51 PM

I can say that I'm really happy with my OBX header. The only problem I had with it, was that it didn't come with an adaptor to work with my early '95, 3 wire O2 sensor. I took it to an exhaust shop and they set me up.

The only beef I have, is that it was made for a 240 with stock engine and transmission mounts. The Nismo trans mount moved everything up so high, that the header will hit the bottom of the car....but seldomly. Between that header, the 3" cat and exhaust, my 240 pulls much stronger.

Here's my install:

Header Install

-Alex S.

04-03-2006, 01:51 PM	#15
importnut Leaky Injector Join Date: Jun 2002 Location: NW Indiana Age: 48 Posts: 111 Trader Rating: (0)	I can say that I'm really happy with my OBX header. The only problem I had with it, was that it didn't come with an adaptor to work with my early '95, 3 wire O2 sensor. I took it to an exhaust shop and they set me up. The only beef I have, is that it was made for a 240 with stock engine and transmission mounts. The Nismo trans mount moved everything up so high, that the header will hit the bottom of the car....but seldomly. Between that header, the 3" cat and exhaust, my 240 pulls much stronger. Here's my install: Header Install -Alex S. __________________ "What about the twinkie?"