|
I ordered a set of these probably back around February. I finally got around to installing these on my subframe and 350Z diff.
It seemed pretty straight forward.
I dinged up the rear bushing pretty bad because I didn't interface the hammer and the bushing. I placed 1/8 plate steel on the bushings when I hammered them into the diff, which made it look a little nicer.
I'm currently compiling video clips and will have an install "guide" on youtube in the next week or so.
Only issue I'm running into right now, is getting the axles put in.
On the LH (US driver side) axle, I had to compress it all the way, and the bearings and grease pack popped out the back of the axle. I need to pack it back up and try it again tonight.
I have adjustable arms on my rear end, so I'll try extending all of them before trying to put in the axles again.
I should have it all assembled and back on the car tonight.
|