Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

nysmo240 · 07-26-2008, 04:54 PM

Waddup? I have a 96 S14 that passed the emissions test but failed becuz the CEL wouldn't come on. The smog tech said that my ECU wasn't throwin any codes eithr so I though it was a burnt bulb. I then bought a bulb from Nissan and just swapped it out with the old one, and still no light. I unplugged the battery for a good several seconds and reconnected, but still no light. I also put the ECU in diagnostics mode and then had it reset, but still not light. Any ideas?

Also, some of the guys here wrote about rewiring it to the oil pressure light...can anyone tell me how u do that and which wires to rewire on the back of the instrument panel? I'll also be lookin it up in my manual in the meantime to try to figure it out.

Thanks.

07-26-2008, 04:54 PM	#81
nysmo240 Join Date: Nov 2002 Location: SoCalifornia Posts: 33 Trader Rating: (2)	Waddup? I have a 96 S14 that passed the emissions test but failed becuz the CEL wouldn't come on. The smog tech said that my ECU wasn't throwin any codes eithr so I though it was a burnt bulb. I then bought a bulb from Nissan and just swapped it out with the old one, and still no light. I unplugged the battery for a good several seconds and reconnected, but still no light. I also put the ECU in diagnostics mode and then had it reset, but still not light. Any ideas? Also, some of the guys here wrote about rewiring it to the oil pressure light...can anyone tell me how u do that and which wires to rewire on the back of the instrument panel? I'll also be lookin it up in my manual in the meantime to try to figure it out. Thanks. __________________ "Life is...Vuetiful!"