Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

e1_griego · 11-01-2022, 05:41 PM

I'm using one of these: https://gaugeart.com/product/gaugeart-can-gauge/ in a breakbeat gauge cup that goes where the right vent goes. They also make just the screen instead of a 52mm gauge.

I'm currently working on another non-240 project right now and my intent is to use one of these: https://www.vadpro.com/collections/p...ts/vad28-basic

It will also be in a 3d printed housing. My buddy has a canchecked gauge in his turbo miata that seems to work pretty well, plus you can add analog inputs to it, as well, without running an analog to can convert (like AEM sells, and cangauge sells them too but you can tell they're AEM).

11-01-2022, 05:41 PM	#2
e1_griego Post Whore! Join Date: Sep 2004 Location: Independence, Ore. Age: 39 Posts: 2,711 Trader Rating: (24)	I'm using one of these: https://gaugeart.com/product/gaugeart-can-gauge/ in a breakbeat gauge cup that goes where the right vent goes. They also make just the screen instead of a 52mm gauge. I'm currently working on another non-240 project right now and my intent is to use one of these: https://www.vadpro.com/collections/p...ts/vad28-basic It will also be in a 3d printed housing. My buddy has a canchecked gauge in his turbo miata that seems to work pretty well, plus you can add analog inputs to it, as well, without running an analog to can convert (like AEM sells, and cangauge sells them too but you can tell they're AEM).