Working on my harness and honestly it has been such an up and down rollercoaster that I wish I had the spare cash for the wiringspecialties harness right now
Here are the 4 clips to remove from the KA harness: F2, F9, F7, F3
It was a little daunting when I unwrapped a lot of the wires that needed to be unwrapped
Basically 2 out of 3 of these clips that go to a relay box in the s13 engine bay (F8, F10) need to be rerouted into the cabin. Then the clips are cut off and they are wired into the KA's F3 clip.
Here is the F3 clip with the black plastic piece removed
And here are all of the clips stripped for splicing
I got confused for the longest time because I was missing wires. The F3 has 39 in total.
F2: 3
F7: 5
F8: 5
F9: 7
F10:6
So there are 26 / 39 wires
Then I found the white clip on the SR harness next to the ecu clip. Luckily it had both male and female parts of the clip, so I can retain the clip without hard wiring. This has 12 wires
And that's where I am at. 38/39 wires accounted for.. :'(