Slow, Slow progress with the tucked radiator, but coming down the how stretch....hopefully.
Big thing to do was to clean up the upper core support and repaint as drilling a 3.5" hole and notching for the upper outlet did some damage to my nice(ish) paint.
prepped and sanded with 340 grit
2 coats of 2k primer/surfacer
Prepped and wet sanded with 800 grit
Finally, 2 coats of single stage jet black base
Tonight and hopefully later this week I strip all of the masking off and starting mounting everything back on to the car.
Big plans for this weekend are to bleed the coolant and test to make sure the new setup is working properly. Then hopefully, i'll be able to put some miles on it to get an alignment done.