Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - s13

91 240 · 04-16-2013, 10:00 AM

Before I could install my freshly coated manifolds, i needed to get the plug wires in place. The relocation of the coils runs the plug wires under the manifolds towards the block.

I started off with a MSD 8.5" kit for the LS truck motors (32823), i bought these before i decided to do the coil relocation. I cut the wires to length, removing the straight boot and replaced them with 90* boots from MSD. I sleeved the wires with a set of Accel plug wire sleeves (170081) as they'd be pretty close.

Here are a couple of shots installed. I still have to modify the power steering lines so i'm leaving the driver's manifold off for now for better access.

04-16-2013, 10:00 AM	#35
91 240 Zilvia Member Join Date: Nov 2003 Location: Austin, Tx Age: 45 Posts: 200 Trader Rating: (8)	Before I could install my freshly coated manifolds, i needed to get the plug wires in place. The relocation of the coils runs the plug wires under the manifolds towards the block. I started off with a MSD 8.5" kit for the LS truck motors (32823), i bought these before i decided to do the coil relocation. I cut the wires to length, removing the straight boot and replaced them with 90* boots from MSD. I sleeved the wires with a set of Accel plug wire sleeves (170081) as they'd be pretty close. Here are a couple of shots installed. I still have to modify the power steering lines so i'm leaving the driver's manifold off for now for better access. __________________ 91 240sx 03 Pathfinder