|
rims and tire clearance question
I have 18 by 9.5 0 offset the 265/35/18 clear fine in the rear I rolled the pinch weld however I'm worried about the front... the front is 18 by 9.5 0 offset also with a 245/40/18 tire car is lowered on Megan lowering springs and kyb struts. The tire wore the hood cable but not the harness on the driver side thank god. I drove the car lightly however now it's good to go I'm worried at full lock or a big bump my fenders gonna rip off lol can I just put the car on jack stands and Jack under the control arm to make sure? Sorry if I'm rambling I'm not into the Tim aspect to much I just made an impulse by on some rotas. . I will post pix thanks
|