Quote:
Originally Posted by slider2828
Hey All,
Installed and it worked!!! The install was soooo easy. But you do need to remove the dash. Pulled constant 12v and acc 12v from the ignition tumbler. Then ground from anywhere. Then cut and wire in a wire from the dash (wire 6 y/lavendar) to speed 2 which is a sine wave and 16ppm setting.... now you have a gps and accelerometer speedo.
[img size=150]https://i.imgur.com/2iT0uXO.jpg[/img]
|
Thanks for sharing this! Your post led me to buy the same exact Dakota Digital unit along with the optional antenna. It?ll be nice to have a working Speedo again with a soon to swap Srvq kit.