Quote:
Originally Posted by tauntdevil
^ Looks good. Curious though, what was the reason for the work dont to the subframe? Looks like just raising the diff? Sorry. Looks dang good though.
|
I installed an R230 rear end from a Z32 Twin Turbo, i kept breaking the stock pinions and the R230 is massive compared to ANY R200.
If you look at the picture a little closer you will see that the mounting ears on the R230 are set out about an Inch wider and will not bolt to subframe, also the "tunnel" where the front of the rear end sits into is to shallow for the R230 to sit flush so i cut it out more and made it deeper..
If you search my Threads i did a more involved writeup/ explanation of the swap.