Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - Suprareal's S13 FB build (sr20det eventually)

Suprareal · 10-28-2015, 10:12 PM

Lots of upgrades being added at the end of the year this year.
Dual brake booster (painted with purple flake)

3 Quart Canton accusump with switched valve to ignition. All push lock -10 AN lines with a very nice Vibrant check valve.

I recently got a sponsorship with mishimoto and this 25 row single pass oil cooler was the first thing i used my discount with. Also using push lock -10 AN. Mounted to get great flow through my bumper.

I made a new set of modded lower front arms this time 1.5" extended. Notched for tie rod clearance of course. And fresh ball joints.
First time modding knuckles. Just your typical shorten tigged up multiple passes and painted brass. (brass knuckles )

These pictures shown are full lock with 255/40/18 on a 9" wide rim. Bottoming out on tension and sway bar that will later be upgraded.

10-28-2015, 10:12 PM	#37
Suprareal Zilvia Junkie Join Date: Sep 2012 Location: LongBeach, CA Age: 31 Posts: 378 Trader Rating: (4)	Lots of upgrades being added at the end of the year this year. Dual brake booster (painted with purple flake) 3 Quart Canton accusump with switched valve to ignition. All push lock -10 AN lines with a very nice Vibrant check valve. I recently got a sponsorship with mishimoto and this 25 row single pass oil cooler was the first thing i used my discount with. Also using push lock -10 AN. Mounted to get great flow through my bumper. I made a new set of modded lower front arms this time 1.5" extended. Notched for tie rod clearance of course. And fresh ball joints. First time modding knuckles. Just your typical shorten tigged up multiple passes and painted brass. (brass knuckles ) These pictures shown are full lock with 255/40/18 on a 9" wide rim. Bottoming out on tension and sway bar that will later be upgraded.