Quote:
|
Originally Posted by SoCalS14
I just cleaned mine Steve, just go out and buy some 1500 & 2000 grit sandpaper...plus some 3M rubbing compund and a bottle of plastic polish...
1. Wet sand FIRST with the 1500 then 2000....
2. Next, use the rubbing compund...put some elbow grease into it!
3. Lastly, use the plastic polish...
Stay with the first step until most of the yellow is gone...then move on...
They should come out pretty clean...take a look at mine in the sig below...
|
I'll prob give it a try this weekend. Thanks for the advice!
