View Single Post
Old 08-17-2016, 01:44 PM   #136
NorcalAP2
 
Join Date: May 2012
Location: Cali
Posts: 41
Trader Rating: (1)
NorcalAP2 is an unknown quantity at this point
Quote:
Originally Posted by LuckyX2 View Post
Can we get a confirmation on this?

If this is true, it would be perfect for someone like me with Z32TT hubs and the Q45/Z32TT axle combo. No more searching for rare Z32TT axles, just use 08+ Z33 axles on both sides with the Z32TT hubs. Would be the new best option for OEM axles assuming it's as strong as the Q45/Z32TT axles. Q45/Z32TT axles are also threaded on the 6x1 flange, it'd be a direct drop in.
I have a set of 08 axles at home. I can count the splines tonight. the OD of the splines on the 240sx and 05 350z axles I measured at 29mm in diameter. The 08 are 32mm in diameter. One of the problems you may run into or that can be a hassle is that the axle side is threaded. You would need to fit the bolt through the stub closest to the diff side. The bolt head would be facing the center of the diff if you get what i mean
NorcalAP2 is offline   Reply With Quote