Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - Small Questions Thread (SEARCH FIRST! Use this instead of making NEW threads)

jing · 05-18-2010, 08:55 PM

I have a set of Stance GR+ for my S13 but to my surprise, I have an S14 5-bolt conversion up front. As such, the spindle bolts will not fit in the mounting holes on my coilovers. From what I have researched, here are my options:

1. Get S13 spindle bolts, then get sleeves from 5lugsleeves.com to fit in the spindle to fit the S13 bolts.
2. Drill out the mounting holes on my coilovers to accomodate the bigger 19mm S14 bolts.
3. Buy S14 lower mounting brackets from Stance.

#1 is sold out unfortunately and it's a few weeks wait which I don't feel like waiting around for. #2 would affect the ability to resell them in the future. #3 is the most expensive but the "right" way to do it.

Do I have any other options?

05-18-2010, 08:55 PM	#1586
jing Zilvia Member Join Date: Dec 2007 Location: Vancouver, BC Age: 35 Posts: 291 Trader Rating: (4)	I have a set of Stance GR+ for my S13 but to my surprise, I have an S14 5-bolt conversion up front. As such, the spindle bolts will not fit in the mounting holes on my coilovers. From what I have researched, here are my options: 1. Get S13 spindle bolts, then get sleeves from 5lugsleeves.com to fit in the spindle to fit the S13 bolts. 2. Drill out the mounting holes on my coilovers to accomodate the bigger 19mm S14 bolts. 3. Buy S14 lower mounting brackets from Stance. #1 is sold out unfortunately and it's a few weeks wait which I don't feel like waiting around for. #2 would affect the ability to resell them in the future. #3 is the most expensive but the "right" way to do it. Do I have any other options?