Quote:
Originally Posted by sentradude
I've checked it all, even though there is 12v to the starter it wont start sometimes... Two Mishimoto starters, new ignition switch.. I just ordered a new complete ignition - i read somewhere that tumbler can wear out causing such problems, so even though the switch is new the key may not be turning it far enough once things are loose and worn from 20+ years of abuse. There are a tens of these intermittent starting threads all over the web. I refuse to put a push button in there! I WILL get to the bottom of this and post fix.
|
Well now that i think about it, before you ordered the tumbler an easy test for that would be just to turn the little "T" slot in the switch disconnected from the tumbler assembly to see if it starts, thus making sure the tumbler was the issue if it does start right up. If not then the Tumbler isn't the issue.