View Single Post
Old 09-14-2020, 09:37 AM   #17
nwg916
 
Join Date: Nov 2014
Location: 916
Age: 28
Posts: 24
Trader Rating: (0)
nwg916 is an unknown quantity at this point
Quote:
Originally Posted by inopsey View Post
are you using a full shroud with the stock fan? if its only at idle your not removing the latent heat from the ac system which is impacting your ac performance. can you feel air being drawn across the condenser? do you have a FMIC on the car? improving your air flow across the condenser will fix this issue (provided everything else is fine from the conversion) of poor cooling at idle (assuming this issue is only at idle)
Everything is all stock. Stock fan clutch shroud, stock condenser fan. I ran a dual altima fan setup on this car previously which were so powerful they would cool the actual car down like the temperature gauge would go below normal because the fans were working so well but the ac performance was still sub par at idle. At this point I am like 95% sure the condenser is at fault. Everything else works as it should. The stock condenser just doesn't work well when converted.
nwg916 is offline   Reply With Quote