|
@BB I see the pics fine.
@Andrew, It's a custom flywheel. The flexplate bolts to the back of the flywheel. The Z's look to have a similar flywheel bolt pattern but I don't have one to compare. The issue isn't so much if it can bolt up, but the diameter and tooth count of the ring gear. If you use a 350z/370z trans the starters on those motors as well as the VK are on the engine side of the trans. This means you can't space out the fly wheel like you would need to in order to compensate for the spacing of the transmisssion with the adapter plate needed.
__________________
|