Quote:
Originally Posted by Kingtal0n
So please help me understand,
All I have to do is:
1. get s14 350z diff bushings from 'maverick'
2. get 06 350z 3.357 6-bolt differential
3. get 350z axles
and this works? Axles are the correct length and the driveshaft angle is the same?
|
I've heard that the differential ends up being lower in the subframe with the adapter bushings than the S13/14 diff is. You have to modify and widen the front mounting area like Stewart Leask did ages ago if you want to maintain the same differential height.
The driveshaft angle should be fine as long as it stays parallel to the transmission output. If the differential is tilted forward with the adapter bushings then that is no good.