Quote:
Originally Posted by OaxKouki
IIRC the only holes on top of the bumper I used were the outter two ones under the corner lights and I just ziptied those. I also cut my foam in half so it would fit inside the jdm bumper. To hold the license plate on I took a flat pieces of steel that was long enough to span the distance of the opening and drilled two holes in it and welded nuts on the back side. I also used two little zipties to put through the bottom two holes of the license plate.
|
Yeah I cut the foam for mine as well. As far as the license plate goes, I just used two zip ties on the top holes and never had any issues with it.