Quote:
Originally Posted by shift_down
92 s13 hatch
I am running +30mm fenders in front and +30mm rear overfenders
I am looking to buy 17 inch wheels
I am looking to run a 9inch wide in front and 10 inch wide in back
I want to run wide tires, something like 245s or 255s
Are my wheel widths suitable?
And if so,
What offset and tire size should I get to sit flush?
|
225 or 235 fronts on a 9" wheel. 255 rears on a 10" wheel. Those will both fit just right. 228.6mm = 9in. 254mm =10in.
Offset really depends where your definition of "flush" is , your ride height and how much camber your running with your setup. You could be "flush" with about 20-25mm of window in offset depending on the above stated settings.
Quote:
Originally Posted by InsTanCeZ
I would try F:17x9-10 R:17x10+0 with 255/40 all around, but that's just an estimate and it also depends on how much camber you have.
|
Dont do this. 255s look like silly on a 9"wheel. All huge, squeezed, and round. Let alone trying to turn the car after that. Rubbbbb City!
Sent from my SGH-T989 using Tapatalk 2